Display Tcp Ipv6 Statistics - 3Com S7906E Command Reference Manual

Received packets:
Total: 0
checksum error:
0
bad code
unreached:
0
hopcount exceeded:
0
parameter problem:
0
echoed:
0
neighbor solicit:
0
router solicit:
0
redirected:
router renumbering
unknown info type:
Deliver failed:
bad length:
0

display tcp ipv6 statistics

Syntax
display tcp ipv6 statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display tcp ipv6 statistics command to display IPv6 TCP connection statistics.
Examples
# Display the statistics of IPv6 TCP connections.
<Sysname> display tcp ipv6 statistics
Received packets:
Total: 0
Field
0 too short:
0
0 too big:
0 reassembly timeout:
0 unknown error type:
0 echo replied:
0 neighbor advert:
0 router advert
0
0
0
0 ratelimited:
1-16
Description
Statistics of received ICMPv6 packets, including
Total number of received packets
Number of packets with checksum errors
Number of too small packets
Number of packets with error codes
Number of packets whose destination is
unreachable
Number of too large packets
Number of packets exceeding the hop limit
Number of packets whose fragmentation and
reassembly times out
Number of packets with parameter errors
Number of packets with unknown errors
Number of request packets
Number of response packets
Number of neighbor solicitation messages
Number of neighbor advertisement packets
Number of router solicitation packets
Number of router advertisement packets
Number of redirected packets
Number of packets recounted by the router
Number of unknown type of packets
Number of packets with a incorrect size
Number of packets failing to be received
because of rate limitation