3Com S7906E Command Reference Manual page 1028

*> Network : 30:30::
NextHop : 30:30::30:1
PrefVal : 0
MED :0
Path/Ogn: i
*> Network : 40:40::
NextHop : 40:40::40:1
PrefVal : 0
MED : 0
Path/Ogn: i
Table 1-5 display bgp ipv6 routing-table command output description
Field
Local router ID
Status codes
Origin
Network
PrefixLen
NextHop
MED
LocPrf
Path
PrefVal
Label
Ogn
Local router ID
Status codes:
* – valid
> – best
d – damped
h – history
i – internal (IGP)
s – summary suppressed (suppressed)
S – Stale
i – IGP (originated in the AS)
e – EGP (learned through EGP)
? – incomplete (learned by other means)
Destination network address
Prefix length
Next Hop
MULTI_EXIT_DISC attribute
Local preference value
AS_PATH attribute, recording the ASs the packet has passed to avoid
routing loops
Preferred value
Label
Origin attribute of the route, which can take on one of the following values:
Indicates that a route is interior to the AS.
i
Summary routes and the routes configured using the network
command are considered IGP routes.
Indicates that a route is learned from the exterior gateway
e
protocol (EGP).
1-13
PrefixLen : 64
LocPrf :
Label : NULL
PrefixLen : 64
LocPrf :
Label : NULL
Description