3Com S7906E Command Reference Manual page 1203

register-whole-checksum (PIM view)
Syntax
register-whole-checksum
undo register-whole-checksum
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
None
Description
Use the register-whole-checksum command to configure the router to calculate the checksum based
on the entire register message.
Use the undo register-whole-checksum command to restore the default configuration.
By default, the checksum is calculated based on the header in the register message.
Related commands: register-policy, register-suppression-timeout.
Examples
# Configure the router to calculate the checksum based on the entire register message in the public
instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] register-whole-checksum
reset pim control-message counters
Syntax
reset pim [ all-instance | vpn-instance vpn-instance-name ] control-message counters [ interface
interface-type interface-number ]
View
User view
Default Level
1: Monitor level
Parameters
all-instance: Specifies all instances.
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
1-46