Mld Version; Require-Router-Alert (Mld View) - 3Com S7906E Command Reference Manual

mld version

Syntax
mld version version-number
undo mld version
View
Interface view
Default Level
2: System level
Parameters
version-number: MLD version, 1 or 2.
Description
Use the mld version command to configure the MLD version on the current interface.
Use the undo mld version command to restore the default MLD version.
By default, the MLD version is MLDv1.
Related commands: version.
Examples
# Set the MLD version to MLDv2 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld version 2

require-router-alert (MLD view)

Syntax
require-router-alert
undo require-router-alert
View
MLD view
Default Level
2: System level
Parameters
None
Description
Use the require-router-alert command to globally configure the device to discard MLD messages
without the Router-Alert option.
Use the undo require-router-alert command to restore the default configuration.
1-21