Display Ospfv3 Routing - 3Com S7906E Command Reference Manual

Router-LSA
Table 1-12 display ospfv3 retrans-list command output description
Interface
Area-ID
Nbr-ID
LS-Type
LS-ID
AdvRouter
SeqNum
Age
CkSum
# Display the statistics of OSPFv3 link state retransmission list.
<Sysname>display ospfv3 retrans-list statistics
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Neighbor
Vlan100 12.1.1.1
Table 1-13 display ospfv3 retrans-list statistics command output description
Field
Interface
Neighbor
LSA-Count

display ospfv3 routing

Syntax
display ospfv3 [ process-id ] routing [ ipv6-address prefix-length | ipv6-address/prefix-length |
abr-routes | asbr-routes | all | statistics ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
ipv6-address: IPv6 address prefix.
prefix-length: Prefix length, in the range 0 to 128.
0.0.0.0 12.1.1.1
Field
LSA-Count
2
Interface name
Neighbor ID
Number of LSAs in the retransmission request list
1-18
0x80000014
Description
Interface name
Area ID
Neighbor router ID
Type of LSA
Link state ID
Advertising Router
LSA sequence Number
Age of LSA
Checksum
Description
774 0xe5b0