Display Ipv6 Relay-Route; Display Ipv6 Relay-Tunnel - 3Com S7906E Command Reference Manual

display ipv6 relay-route

Syntax
display ipv6 relay-route
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 relay-route command to display IPv6 recursive route information.
Examples
# Display IPv6 recursive route information.
<Sysname> display ipv6 relay-route
Total Number of relay-route is: 1
Dest/Mask: 192::1/64
Related instance id(always 0): 0(1)
Table 1-9 display ipv6 relay-route command output description
Total Number of Relay-route
Dest/Mask
Related instance id(always 0)

display ipv6 relay-tunnel

Syntax
display ipv6 relay-tunnel
View
Any view
Default Level
1: Monitor level
Field
Total number of recursive routes
Destination address/mask of the recursive route
IPv6 supports public networks only. Therefore, the instance
ID can be 0 only.
The number in the parentheses after the instance ID
indicates the number of routes that have used the recursive
route in the routing table.
1-22
Description