Arp Configuration Commands; Arp Check Enable; Arp Max-Learning-Num - 3Com S7906E Command Reference Manual

1

ARP Configuration Commands

ARP Configuration Commands

arp check enable

Syntax
arp check enable
undo arp check enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the arp check enable command to enable ARP entry check. With this function enabled,
configuring such a static ARP entry is not allowed; otherwise, the system displays error messages.
Use the undo arp check enable command to disable the function. After the ARP entry check is
disabled, you can configure such a static ARP entry on the device.
By default, ARP entry check is enabled.
Examples
# Enable ARP entry check.
<Sysname> system-view
[Sysname] arp check enable

arp max-learning-num

Syntax
arp max-learning-num number
undo arp max-learning-num
View
VLAN interface view
Default Level
2: System level
1-1