Pim Configuration Commands - 3Com S7906E Command Reference Manual

1

PIM Configuration Commands

The term "router" in this document refers to a router in a generic sense or a Layer 3 switch running the
PIM protocol.
PIM Configuration Commands
auto-rp enable
Syntax
auto-rp enable
undo auto-rp enable
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
None
Description
Use the auto-rp enable command to enable auto-RP.
Use the undo auto-rp enable command to disable auto-RP.
By default, auto-RP is disabled.
Related commands: static-rp.
Examples
# Enable auto-RP in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] auto-rp enable
1-1