Rrpp Domain; Rrpp Enable - 3Com S7906E Command Reference Manual

[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protect-vlan reference-instance 0 1 2
[Sysname-rrpp-domain1]
secondary-port gigabitethernet 3/0/2 level 0
[Sysname-rrpp-domain1] ring 10 enable

rrpp domain

Syntax
rrpp domain domain-id
undo rrpp domain domain-id
View
System view
Default Level
2: System level
Parameters
domain-id: RRPP domain ID, in the range 1 to 8.
Description
Use the rrpp domain command to create an RRPP domain and enter its view.
Use the undo rrpp domain command to remove an RRPP domain.
Note that:
When you delete an RRPP domain, the control VLAN of it will be deleted at the same time.
When you delete an RRPP domain, you must ensure it has no RRPP ring.
Related commands: control-vlan, ring, ring enable, rrpp enable, timer.
Examples
# Create RRPP domain 1.
<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1]

rrpp enable

Syntax
rrpp enable
undo rrpp enable
View
System view
ring 10 node-mode
1-15
master primary-port gigabitethernet 3/0/1