Display Pim Routing-Table - 3Com S7906E Command Reference Manual

LAN delay
Override interval
State refresh interval
Neighbor tracking

display pim routing-table

Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] routing-table [ group-address [ mask
{ mask-length | mask } ] | source-address [ mask { mask-length | mask } ] | incoming-interface
[ interface-type interface-number | register ] | outgoing-interface { include | exclude | match }
{ interface-type interface-number | register } | mode mode-type | flags flag-value | fsm ] *
View
Any view
Default Level
1: Monitor level
Parameters
all-instance: Specifies all instances.
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
source-address: Multicast source address.
mask: Mask of the multicast group/source address, 255.255.255.255 by default.
mask-length: Mask length of the multicast group/source address, in the range of 0 to 32. The system
default is 32.
incoming-interface: Displays PIM routing entries that contain the specified interface as the incoming
interface.
interface-type interface-number: PIM Specifies an interface by its type and number.
register: Specifies the register interface. This keyword is valid only if mode-type is not specified or is
sm.
outgoing-interface: Displays PIM routing entries of which the outgoing interface is the specified
interface.
include: Displays PIM routing entries of which the outgoing interface list includes the specified
interface.
exclude: Displays PIM routing entries of which the outgoing interface list excludes the specified
interface.
match: Displays PIM routing entries of which the outgoing interface list includes only the specified
interface.
Field Description
Prune delay
Prune override interval
Interval of sending state refresh messages
Neighbor tracking status (enabled/disabled)
1-23