Peer Default-Route-Advertise (Mbgp Family View) - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
group-name: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters.
ip-address: IP address of an IPv4 MBGP peer.
as-path-acl-number: AS path ACL number, in the range 1 to 256.
export: Filters outgoing routes.
import: Filters incoming routes.
Description
Use the peer as-path-acl command to configure the filtering of routes incoming from or outgoing to a
peer/peer group based on a specified AS path ACL.
Use the undo peer as-path-acl command to remove the filtering.
By default, no AS path ACL based filtering is configured.
Related commands: ip as-path, if-match as-path and apply as-path (refer to IP Route policy
Commands in the IP Routing Volume).
Examples
# In IPv4 MBGP address family view, reference the AS path ACL 1 to filter routes outgoing to the peer
group test.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]group test external
[Sysname-bgp]peer test as-number 200
[Sysname-bgp]ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test as-path-acl 1 export

peer default-route-advertise (MBGP family view)

Syntax
peer { group-name | ip-address } default-route-advertise [ route-policy route-policy-name ]
undo peer { group-name | ip-address } default-route-advertise
View
IPv4 MBGP address family view
Default Level
2: System level
Parameters
group-name: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters.
ip-address: IP address of an IPv4 MBGP peer.
1-35