Display Bgp Ipv6 Multicast Group - 3Com S7906E Command Reference Manual

display bgp ipv6 multicast group

Syntax
display bgp ipv6 multicast group [ ipv6-group-name ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-name: Peer group name, a string of 1 to 47 characters.
Description
Use the display bgp ipv6 multicast group command to display IPv6 MBGP peer group information.
If no ipv6-group-name is specified, information about all peer groups is displayed.
Examples
# Display information about the IPv6 MBGP peer group aaa.
<Sysname> display bgp ipv6 group aaa
BGP peer-group is aaa
remote AS number not specified
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
20:20::20:1
Table 1-3 display bgp ipv6 multicast group command output description
BGP peer-group
remote AS
Type
Maximum allowed prefix number
Threshold
V AS MsgRcvd MsgSent
4 200 170
Field
OutQ PrefRcv Up/Down
141 0 2 02:13:35 Established
Name of the IPv6 MBGP peer group
AS number of the IPv6 MBGP peer group
Type of the IPv6 MBGP peer group:
Maximum number of prefixes allowed to receive
from the IPv6 MBGP peer group
Threshold value
1-11
State
Description