Description
Use the isis silent command to disable the interface from sending and receiving IS-IS packets.
Use the undo isis silent command to restore the default.
By default, an interface is not disabled from sending and receiving IS-IS packets.
The feature is not supported on the loopback interface.
Examples
# Disable VLAN-interface 10 from sending and receiving IS-IS packets.
<Sysname> system-view
[Sysname] interface vlan-interface10
[Sysname-Vlan-interface10] isis silent
isis small-hello
Syntax
isis small-hello
undo isis small-hello
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the isis small-hello command to configure the interface to send small hello packets without CLVs.
Use the undo isis small-hello command to restore the default.
An interface sends standard hello packets by default.
This command is not available in loopback interface view.
1-43