Ospfv3 - 3Com S7906E Command Reference Manual

View
OSPFv3 view
Default Level
2: System level
Parameters
maximum: Maximum number of equal-cost routes for load-balancing. Its value is in the range 1 to 4.
The argument being set to 1 means no load balancing is available.
Description
Use the maximum load-balancing command to configure the maximum number of equal-cost routes
for load-balancing.
Use the undo maximum load-balancing command to restore the default.
By default, the maximum number of equal-cost routes for load-balancing in OSPFv3 is 4.
Examples
# Configure the maximum number of equal-cost routes for load-balancing as 2.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] maximum load-balancing 2

ospfv3

Syntax
ospfv3 [ process-id ]
undo ospfv3 [ process-id ]
View
System view
Default Level
2: System level
Parameters
process-id: OSPFv3 process ID, ranging from 1 to 65535. The process ID defaults to 1.
Description
Use the ospfv3 command to enable an OSPFv3 process and enter OSPFv3 view.
Use the undo ospfv3 command to disable an OSPFv3 process.
The system runs no OSPFv3 process by default.
Related commands: router-id.
1-27