Graceful-Restart (Ospf View) - 3Com S7906E Command Reference Manual

Parameters
acl-number: Number of an ACL used to filter incoming routes, in the range 2000 to 3999.
ip-prefix-name: Name of an IP address prefix list used to filter incoming routes based on destination IP
address, a string of up to 19 characters. For details about IP prefix lists, refer to Route Policy
Configuration in the IP Routing Volume.
gateway ip-prefix-name: Name of an IP address prefix list used to filter routes based on the next hop of
the routing information, a string of up to 19 characters.
Description
Use the filter-policy import command to configure the filtering of routes calculated from received
LSAs.
Use the undo filter-policy import command to disable the filtering.
By default, the filtering is not configured.
Examples
# Filter incoming routes using ACL2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 192.168.10.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] ospf 100
[Sysname-ospf-100] filter-policy 2000 import

graceful-restart (OSPF view)

Syntax
graceful-restart [ nonstandard | ietf ]
undo graceful-restart
View
OSPF view
Default Level
2: System level
Parameters
nonstandard: Enables the non-IETF GR capability.
ietf: Enables the IETF GR capability.
Description
Use the graceful-restart command to enable OSPF Graceful Restart capability.
Use the undo graceful-restart command to disable OSPF Graceful Restart capability.
By default, OSPF Graceful Restart capability is disabled.
Note the following:
1-34