3Com S7906E Command Reference Manual page 819

Table 1-9 display isis peer command output description
Field
System Id System ID of the neighbor
Interface Interface connecting to the neighbor
Circuit Id Circuit ID
State Circuit state
Holdtime
HoldTime
Within the holdtime if no hellos are received from the neighbor, the neighbor is
considered down. If a hello is received, the holdtime is reset to the initial value.
Circuit type
L1 means the circuit type is Level-1 and the neighbor is a Level-1 router.
Type L2 means the circuit type is Level-2 and the neighbor is a Level-2 router.
L1(L1L2) means the circuit type is Level-1 and the neighbor is a Level-1-2 router.
L2(L1L2) means the circuit type is Level-2 and the neighbor is a Level-1-2 router.
PRI DIS priority of the neighbor
Area
The neighbor's area address
Address(es)
Peer IP
IP address of the neighbor
Address(es)
Uptime Time that elapsed since the neighbor relationship was formed.
Adj Protocol Adjacency protocol
# Display IS-IS neighbor statistics information.
<Sysname> display isis peer statistics
Peer Statistics information for ISIS(1)
---------------------------------------
Type IPv4 Up/Init
LAN Level-1
LAN Level-2
P2P
Table 1-10 display isis peer statistics command output description
Field
Neighbor type:
LAN Level-1: Number of Level-1 neighbors whose network type is broadcast.
Type
LAN Level-2: Number of Level-2 neighbors whose network type is broadcast.
P2P: Number of neighbors whose network type is P2P.
IPv4 Up Number of IPv4 neighbors in up state
IPv4 Init Number of IPv4 neighbors in init state
IPv6 Up Number of IPv6 neighbors in up state
IPv6 Init Number of IPv6 neighbors in init state
Description
IPv6 Up/Init
0/0
0/0
3/0
Description
1-20
0/0
0/0
0/0