Port Interface Type
Display Port Interface
Type
You can configure the port interface type.
Display Port Interface Type
Update Port Interface Type
Reset NNI Configuration
See Chapter 11 for more information about port interface types.
Display the interface type for each port of the CoreBuilder 9000 ATM
Enterprise Switch. The interface type is Gateway (GWY), User to Network
Interface (UNI) or Network to Network Interface (NNI).
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Direct access sequence:
Command Result
System action taken:
System message display:
(1) SET: Switch Setup
(3) NNI: NNI Setup
(3) GIF: NNI Get Interface Type
1 1 3 3
The interface type for each port of the
CoreBuilder 9000 ATM Enterprise Switch is displayed.
Information is displayed as shown in the example.
Port Interface Type
145