Display Interface - 3Com 3CRWX120695A Command Reference Manual

118 C 6: IP S
HAPTER

display interface

C
ERVICES OMMANDS
Table 26 Output for display arp (continued)
Field
Type
State
See Also
"set arp" on page 133
"set arp agingtime" on page 134
Shows the IP interfaces configured on the wireless LAN switch.
Syntax —
display interface [vlan-id]
— VLAN name or number.
vlan-id
Default — If you do not specify a VLAN ID, interfaces for all VLANs are
displayed.
Usage — All.
History — Introduced in MSS Version 3.0.
Description
Entry type:
DYNAMIC — Entry was learned from network traffic and
ages out if unused for longer than the ARP aging
timeout.
LOCAL — Entry for the WX switch's MAC address. Each
VLAN has one local entry for the WX switch's MAC
address.
PERMANENT — Entry does not age out and remains in
the configuration even following a reboot.
STATIC — Entry does not age out but is removed after a
reboot.
Entry state:
RESOLVING — MSS sent an ARP request for the entry
and is waiting for the reply.
RESOLVED — Entry is resolved.