Reset Mld Group Port-Info; Reset Mld Ssm-Mapping Group - 3Com S7906E Command Reference Manual

<Sysname> reset mld group interface vlan-interface 100 ff03::101:10

reset mld group port-info

Syntax
reset mld group port-info { all | ipv6-group-address } [ vlan vlan-id ]
View
User view
Default Level
2: System level
Parameters
all: Clears Layer 2 port information of all the MLD multicast groups.
Ipv6-group-address: Clears Layer 2 port information of the specified MLD multicast group. The effective
range of group-address is FFxy::/16, where x and y represent any hexadecimal number between 0 and
F, inclusive.
vlan-id: Clear Layer 2 port information of MLD multicast groups in the specified VLAN. The effective
range of vlan-id is 1 to 4094.
Description
Use the reset mld group port-info command to clear Layer 2 port information of MLD multicast
groups.
Note that:
Layer 2 ports for MLD multicast groups include member ports and router ports.
This command cannot clear Layer 2 port information about MLD multicast groups of static joins.
Related commands: display mld group port-info.
Examples
# Clear Layer 2 port information of all MLD multicast groups in all VLANs.
<Sysname> reset mld group port-info all
# Clear Layer 2 port information of all MLD multicast groups in VLAN 100.
<Sysname> reset mld group port-info all vlan 100
# Clear Layer 2 port information about multicast group FF03::101:10 in VLAN 100.
<Sysname> reset mld group port-info ff03::101:10 vlan 100

reset mld ssm-mapping group

Syntax
reset mld ssm-mapping group { all | interface interface-type interface-number { all |
ipv6-group-address [ prefix-length ] [ ipv6-source-address [ prefix-length ] ] } }
View
User view
1-23