Ipv6 Icmpv6 Multicast-Echo-Reply Enable; Ipv6 Nd Autoconfig Managed-Address-Flag - 3Com S7906E Command Reference Manual

Description
Use the ipv6 icmp-error command to configure the size and update period of the token bucket.
Use the undo ipv6 icmp-error command to restore the defaults.
By default, the size is 10 and the update period is 100 milliseconds. That is, at most 10 ICMPv6 error
packets can be sent within 100 milliseconds.
Examples
# Set the capacity of the token bucket to 50 and the update period to 100 milliseconds.
<Sysname> system-view
[Sysname] ipv6 icmp-error bucket 50 ratelimit 100

ipv6 icmpv6 multicast-echo-reply enable

Syntax
ipv6 icmpv6 multicast-echo-reply enable
undo ipv6 icmpv6 multicast-echo-reply
View
System view
Default Level
2: System level
Parameters
None
Description
Use the ipv6 icmpv6 multicast-echo-reply enable command to enable the sending of multicast echo
replies.
Use the undo ipv6 icmpv6 multicast-echo-reply command to disable the sending of multicast echo
replies.
By default, the device is disabled from sending multicast echo replies.
Examples
# Enable the sending of multicast echo replies.
<Sysname> system-view
[Sysname] ipv6 icmpv6 multicast-echo-reply enable

ipv6 nd autoconfig managed-address-flag

Syntax
ipv6 nd autoconfig managed-address-flag
undo ipv6 nd autoconfig managed-address-flag
1-26