Display Pim Neighbor - 3Com S7906E Command Reference Manual

Note that if neither all-instance nor vpn-instance is specified, this command will display the
information on the public instance.
Examples
# In the public instance view the information of join/prune messages to send in the PIM-SM mode.
<Sysname> display pim join-prune mode sm
VPN-Instance: public net
Expiry Time: 50 sec
Upstream nbr: 10.1.1.1 (Vlan-interface1)
1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s)
-------------------------------------------------------------------------
Total (*, G) join(s): 1, (S, G) join(s): 0, (S, G, rpt) prune(s): 1
Table 1-7 display pim join-prune command output description
VPN-Instance: public net
Expiry Time:
Upstream nbr:
(*, G) join(s)
(S, G) join(s)
(S, G, rpt) prune(s)

display pim neighbor

Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] neighbor [ interface interface-type
interface-number | neighbor-address | verbose ] *
View
Any view
Default Level
1: Monitor level
Parameters
all-instance: Specifies all instances.
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
interface-type interface-number: Displays the PIM neighbor information on a particular interface.
neighbor-address: Displays the information of a particular PIM neighbor.
verbose: Displays the detailed PIM neighbor information.
Field
Public instance
Expiry time of sending join/prune messages
IP address of the upstream PIM neighbor and the
interface connecting to it
Number of (*, G) joins to send
Number of (S, G) joins to send
Number of (S, G, rpt) prunes
1-21
Description