Display Ospfv3 Next-Hop; Display Ospfv3 Peer - 3Com S7906E Command Reference Manual

ASE
Total

display ospfv3 next-hop

Syntax
display ospfv3 [ process-id ] next-hop
View
Any view
Default Level
1: Monitor level
Parameters
process-id: Specifies ID of an OSPFv3 process, ranging from 1 to 65535.
Description
Use the display ospfv3 next-hop command to display OSPFv3 next hop information.
If no process is specified, next hop information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 next hop information.
<Sysname> display ospfv3 next-hop
OSPFv3 Router with ID (2.2.2.2) (Process 1)
Neighbor-Id
1.1.1.1
Table 1-6 display ospfv3 next-hop command output description
Neighbor-Id
Next-hop
Interface
RefCount

display ospfv3 peer

Syntax
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ] [ verbose ] |
peer-router-id ]
Field
Next-Hop
FE80::20F:E2FF:FE00:1
Field
AS-external-LSA number
Total LSA number
Interface
Vlan100
Neighboring router ID
Next-hop address
Outbound interface
Reference count
1-12
Description
RefCount
1
Description