Ipv4-Family Multicast; Network (Mbgp Family View) - 3Com S7906E Command Reference Manual

[Sysname-bgp]ipv4-family multicast
[Sysname-bgp-af-mul] import-route rip

ipv4-family multicast

Syntax
ipv4-family multicast
undo ipv4-family multicast
View
BGP view
Default Level
2: System level
Parameters
None
Description
Use the ipv4-family multicast command to enter IPv4 MBGP address family view.
Use the undo ipv4-family multicast command to remove all the settings made in IPv4 MBGP address
family view.
Examples
# Enter IPv4 MBGP address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul]

network (MBGP family view)

Syntax
network ip-address [ mask | mask-length ] [ short-cut | route-policy route-policy-name ]
undo network ip-address [ mask | mask-length ] [ short-cut ]
View
IPv4 MBGP address family view
Default Level
2: System level
Parameters
ip-address: Destination IP address.
mask: Mask of the network address, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
1-31