Isis Timer Retransmit - 3Com S7906E Command Reference Manual

undo isis timer lsp
View
Interface view
Default Level
2: System level
Parameters
time: Specifies the minimum interval in milliseconds for sending link-state packets, ranging from 1 to
1000.
count: Specifies the maximum number of link-state packets to be sent at one time, in the range of 1 to
1000. The default is 5.
Description
Use the isis timer lsp command to configure the minimum interval for sending LSPs on the interface
and specify the maximum LSPs that can be sent per time.
Use the undo isis timer lsp command to restore the default of 33ms.
Related commands: isis timer retransmit.
This command is not available in loopback interface view.
Examples
# Configure the interval as 500 milliseconds for sending LSPs on interface VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis timer lsp 500

isis timer retransmit

Syntax
isis timer retransmit seconds
undo isis timer retransmit
View
Interface view
Default Level
2: System level
1-47