Default-Route Imported (Ipv6 Mbgp Address Family View); Display Ipv6 Multicast Routing-Table - 3Com S7906E Command Reference Manual

Examples
# Devices A and B belong to AS100 and device C belongs to AS200. C is the peer of A and B. Configure
the MED of A as 25 to make C select the path from B.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] default med 25

default-route imported (IPv6 MBGP address family view)

Syntax
default-route imported
undo default-route imported
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
None
Description
Use the default-route imported command to enable default route redistribution into the IPv6 MBGP
routing table.
Use the undo default-route imported command to disable the redistribution.
By default, default route redistribution is disabled.
Examples
# Enable default and OSPFv3 route redistribution into IPv6 MBGP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] default-route imported
[Sysname-bgp-af-ipv6-mul] import-route ospfv3 1

display ipv6 multicast routing-table

Syntax
display ipv6 multicast routing-table [ verbose ]
View
Any view
1-7