3Com S7906E Command Reference Manual page 680

View
Any view
Default Level
1: Monitor level
Parameters
protocol: Routing protocol. It can be bgp, direct, isis, ospf, rip, static, or guard.
inactive: Displays information about only inactive routes. With this argument absent, the command
displays information about both active and inactive routes.
verbose: Displays detailed routing table information. With this argument absent, the command displays
brief routing table information.
Description
Use the display ip routing-table protocol command to display routing information of a specified
routing protocol.
Examples
# Display brief information about direct routes.
<Sysname> display ip routing-table protocol direct
Public Routing Table : Direct
Summary Count : 4
Direct Routing table Status : < Active>
Summary Count :
Destination/Mask
2.2.2.0/24
2.2.2.2/32
127.0.0.0/8
127.0.0.1/32
Direct Routing table Status : < Inactive>
Summary Count : 0
# Display brief information about static routes.
<Sysname> display ip routing-table protocol static
Public Routing Table : Static
Summary Count : 1
Static Routing table Status : < Active>
Summary Count :
Static Routing table Status : < Inactive>
Summary Count : 1
Destination/Mask
4
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
0
Proto Pre Cost
NextHop Interface
2.2.2.1 Vlan2
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1
NextHop Interface
1-11
InLoop0