Display Ospf Request-Queue - 3Com S7906E Command Reference Manual

Description
Use the display ospf peer statistics command to display OSPF neighbor statistics.
If no OSPF process is specified, OSPF neighbor statistics of all OSPF processes is displayed.
Examples
# Display OSPF neighbor statistics.
<Sysname> display ospf peer statistics
OSPF Process 1 with Router ID 10.3.1.1
Area ID
0.0.0.0
0.0.0.2
Total
Table 1-12 display ospf peer statistics command output description
Field
Area ID
Down
Attempt
Init
2-Way
ExStart
Exchange
Loading
Full
Total

display ospf request-queue

Syntax
display ospf [ process-id ] request-queue [ interface-type interface-number ] [ neighbor-id ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
interface-type interface-number: Interface type and number.
Neighbor Statistics
Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0 0 0 0
0 0 0 0
0 0 0 0
Area ID. The state statistics information of all the routers in the area to which
the router belongs is displayed.
Number of neighboring routers in the Down state in the same area
Number of neighboring routers in the Attempt state in the same area
Number of neighboring routers in the Init state in the same area
Number of neighboring routers in the 2-Way state in the same area
Number of neighboring routers in the ExStart state in the same area
Number of neighboring routers in the Exchange state in the same area
Number of neighboring routers in the Loading state in the same area
Number of neighboring routers in the Full state in the same area
Total number of neighbors under the same state, namely, Down, Attempt, Init,
2-Way, ExStart, Loading, or Full.
0 0 0
0 0 0
0 0 0
Description
1-25
1 1
1 1
2 2