Import-Route (Ipv6 Mbgp Address Family View); Ipv6-Family Multicast - 3Com S7906E Command Reference Manual

<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] filter-policy 2000 import

import-route (IPv6 MBGP address family view)

Syntax
import-route protocol [ process-id ] [ med med-value | route-policy route-policy-name ] *
undo import-route protocol [ process-id ]
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
protocol: Redistributes routes from the protocol, which can be direct, isisv6, ospfv3, ripng or static at
present.
process-id: Process ID. It ranges from 1 to 65535. This argument is available when the protocol is
isisv6, ospfv3, or ripng.
med-value: Default MED value, in the range 0 to 4294967295. If no MED is specified, the cost of a
redistributed route will be used as its MED in the BGP routing domain.
route-policy-name: Name of a route policy used to filter redistributed routes, a string of 1 to 19
characters.
Description
Use the import-route command to redistribute routes from another routing protocol.
Use the undo import-route command to disable route redistribution from a routing protocol.
By default, IPv6 MBGP does not redistribute routes from any routing protocol.
The origin attribute of routes redistributed with the import-route command is incomplete.
Examples
# Redistribute routes from RIPng 1.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] import-route ripng 1

ipv6-family multicast

Syntax
ipv6-family multicast
undo ipv6-family multicast
1-27