Display Ospfv3 Topology - 3Com S7906E Command Reference Manual

DB Description
Ls Req
Ls Upd
Ls Ack
Discarded

display ospfv3 topology

Syntax
display ospfv3 [ process-id ] topology [ area area-id ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: Displays the topology information of an OSPFv3 process; The process ID ranges from 1 to
65535.
area: Displays the topology information of the specified area.
area-id: ID of an area, a decimal integer (in the range of 0 to 4294967295) that is translated into IPv4
address format by the system or an IPv4 address.
Description
Use the display ospfv3 topology command to display OSPFv3 topology information. If no process is
specified, topology information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 area 1 topology information.
<Sysname> display ospfv3 topology area 1
OSPFv3 Area (0.0.0.1) topology
Type ID(If-Index)
Rtr 1.1.1.1
Rtr 2.2.2.2
Table 1-17 display ospfv3 topology command output description
Type
ID(If-Index)
Bits
Field
OSPFv3 Process (1)
Bits Metric
--
1
Field
1-21
Description
Database description packet
Link state request packet
Link state update packet
Link state acknowledgement packet
Discarded packet
Next-Hop Interface
2.2.2.2 Vlan100
Description
Type of node
Router ID
Flag bit