Display Ospf Nexthop - 3Com S7906E Command Reference Manual

Table 1-8 display ospf 1 lsdb network command output description
Field
Type
LS ID
Adv Rtr
LS Age
Len
Options
Seq#
Chksum
Net Mask
Attached Router

display ospf nexthop

Syntax
display ospf [ process-id ] nexthop
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the display ospf nexthop command to display OSPF next hop information.
If no OSPF process is specified, the next hop information of all OSPF processes is displayed.
Examples
# Display OSPF next hop information.
<Sysname> display ospf nexthop
OSPF Process 1 with Router ID 192.168.0.1
LSA type
DR IP address
Router that advertised the LSA
LSA age time
LSA length
LSA options:
O: Opaque LSA advertisement capability
E: AS External LSA reception capability
EA: External extended LSA reception capability
DC: On-demand link support
N: NSSA external LSA support
P: Capability of an NSSA ABR to translate Type-7 LSAs into Type-5 LSAs.
LSA sequence number
LSA checksum
Network mask
ID of the router that established adjacency with the DR, and ID of the DR itself
Routing Nexthop Information
Description
1-21