mld robust-count
Syntax
mld robust-count robust-value
undo mld robust-count
View
Interface view
Default Level
2: System level
Parameters
robust-value: MLD querier robustness variable, with an effective range of 2 to 5.
Description
Use the mld robust-count command to configure the MLD querier robustness variable on the current
interface.
Use the undo mld robust-count command to restore the system default.
By default, the MLD querier robustness variable is 2.
Related commands: robust-count, mld timer query, mld last-listener-query-interval, mld timer
other-querier-present, display mld interface.
Examples
# Set the MLD querier robustness variable to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld robust-count 3
mld send-router-alert
Syntax
mld send-router-alert
undo mld send-router-alert
View
Interface view
Default Level
2: System level
Parameters
None
1-15
Need help?
Do you have a question about the S7906E and is the answer not in the manual?