Pim Ipv6 Require-Genid; Pim Ipv6 Sm - 3Com S7906E Command Reference Manual

[Sysname-Vlan-interface100] pim ipv6 holdtime join-prune 280

pim ipv6 require-genid

Syntax
pim ipv6 require-genid
undo pim ipv6 require-genid
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the pim ipv6 require-genid command enable rejection of hello messages without Generation_ID.
Use the undo pim ipv6 require-genid command to restore the default configuration.
By default, hello messages without Generation_ID are accepted.
Examples
# Enable VLAN-interface 100 to reject hello messages without Generation_ID.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 require-genid

pim ipv6 sm

Syntax
pim ipv6 sm
undo pim ipv6 sm
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the pim ipv6 sm command to enable IPv6 PIM-SM.
Use the undo pim ipv6 sm command to disable IPv6 PIM-SM.
1-35