Filter-Policy Export (Ospf View); Filter-Policy Import (Ospf View) - 3Com S7906E Command Reference Manual

filter-policy export (OSPF view)

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]
View
OSPF view
Default Level
2: System level
Parameters
acl-number: Number of an ACL used to filter redistributed routes, in the range 2000 to 3999.
ip-prefix-name: Name of an IP prefix list used to filter redistributed routes, a string of up to 19
characters.
protocol: Specifies a protocol from which to filter redistributed routes. The protocol can be direct, static,
rip, ospf, isis or bgp. If no protocol is specified, all redistributed routes are filtered.
process-id: Process ID, which is required when the protocol is rip, ospf or isis, in the range 1 to 65535.
Description
Use the filter-policy export command to configure the filtering of redistributed routes.
Use the undo filter-policy export command to disable the filtering.
By default, the filtering of redistributed routes is not configured.
You can use this command to filter redistributed routes as needed.
Related commands: import-route.
Examples
# Filter redistributed routes using ACL2000.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] filter-policy 2000 export

filter-policy import (OSPF view)

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name | gateway ip-prefix-name } import
undo filter-policy import
View
OSPF view
Default Level
2: System level
1-33