3Com S7906E Command Reference Manual page 1340

1
MLD Configuration Commands
The term "router" in this document refers to a router in a generic sense or a Layer 3 switch running MLD.
MLD Configuration Commands
display mld group
Syntax
display mld group [ ipv6-group-address | interface interface-type interface-number ] [ static |
verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-address: MLD multicast group address, in the range of FFxy::/16 (excluding FFx0::/16,
FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number ranging from 0 to
F.
interface interface-type interface-number: Displays the information of MLD multicast groups on the
specified interface.
static: Displays the information of statically joined MLD multicast groups.
verbose: Displays detailed information of MLD multicast groups.
Description
Use the display mld group command to view information of MLD multicast groups.
Note that:
If you do not specify an IPv6 mutlicast group address, this command will display the MLD
information of all the multicast groups.
If you do not specify interface-type interface-number, this command will display the MLD multicast
group information on all the interfaces.
If you do not specify the static keyword, the information of only dynamically joined MLD groups will
be displayed.
1-1