Static-Bind Ip-Address; Static-Bind Mac-Address - 3Com S7906E Command Reference Manual

static-bind ip-address

Syntax
static-bind ip-address ip-address [ mask-length | mask mask ]
undo static-bind ip-address
View
DHCP address pool view
Default Level
2: System level
Parameters
ip-address: IP address of a static binding. If no mask and mask length is specified, the natural mask is
used.
mask-length: Mask length of the IP address, that is, the number of ones in the mask, in the range of 0 to
32.
mask mask: Specifies the IP address mask, in dotted decimal format.
Description
Use the static-bind ip-address command to specify an IP address in a DHCP address pool for a static
binding.
Use the undo static-bind ip-address command to remove the statically bound IP address.
By default, no IP address is statically bound in a DHCP address pool.
Note that:
Use the static-bind ip-address command together with the static-bind mac-address or
static-bind client-identifier command to accomplish a static binding configuration.
If the statically bound IP address is an interface address of the DHCP server, the static binding
does not take effect.
If you use the static-bind ip-address command repeatedly, the latest configuration will overwrite
the previous one.
Related commands: dhcp server ip-pool, static-bind client-identifier, static-bind mac-address.
Examples
# Bind the client MAC address 0000-e03f-0305 to the IP address 10.1.1.1 with the mask 255.255.255.0
in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Sysname-dhcp-pool-0] static-bind mac-address 0000-e03f-0305

static-bind mac-address

Syntax
static-bind mac-address mac-address
1-23