Igmp-Snooping Max-Response-Time; Igmp-Snooping Overflow-Replace - 3Com S7906E Command Reference Manual

[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping last-member-query-interval 3

igmp-snooping max-response-time

Syntax
igmp-snooping max-response-time interval
undo igmp-snooping max-response-time
View
VLAN view
Default Level
2: System level
Parameters
interval: Maximum response time to IGMP general queries, in seconds. The effective range is 1 to 25.
Description
Use the igmp-snooping max-response-time command to configure the maximum response time to
IGMP general queries in the VLAN.
Use the undo igmp-snooping max-response-time command to restore the default setting.
By default, the maximum response time to IGMP general queries is 10 seconds.
This command takes effect only if IGMP Snooping is enabled in the VLAN.
Related commands: igmp-snooping enable, max-response-time, igmp-snooping query-interval.
Examples
# Enable IGMP Snooping and set the maximum response time to IGMP general queries to 5 seconds in
VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping max-response-time 5

igmp-snooping overflow-replace

Syntax
igmp-snooping overflow-replace [ vlan vlan-list ]
undo igmp-snooping overflow-replace [ vlan vlan-list ]
View
Ethernet interface view, Layer 2 aggregate interface view, port group view
1-16