3Com S7906E Command Reference Manual page 667

IP Routing Volume Organization
Manual Version
20090615-C-1.01
Product Version
Release 6300 series
Organization
The IP Routing Volume is organized as follows:
Features
IP Routing Table
Display
Static Routing
RIP
OSPF
IS-IS
BGP
IPv6 Static Routing
IPv6 RIPng
IPv6 OSPFv3
IPv6 IS-IS
IPv6 BGP
This document introduces the Display commands for IP Routing Table.
This document introduces the commands for Static Routing.
Routing Information Protocol (RIP) is a simple Interior Gateway Protocol
(IGP), mainly used in small-sized networks. This document introduces
the commands for RIP configuration.
Open Shortest Path First (OSPF) is an Interior Gateway Protocol based
on the link state developed by IETF. This document introduces the
commands for OSPF configuration.
Intermediate System-to-Intermediate System (IS-IS) is a link state
protocol, which uses the shortest path first (SPF) algorithm. This
document introduces the commands for IS-IS configuration.
Border gateway protocol (BGP) is an inter-autonomous system (inter-AS)
dynamic route discovery protocol. This document introduces the
commands for BGP configuration.
Similar to IPv4 static routes, IPv6 static routes work well in simple IPv6
network environments. This document introduces the commands for IPv6
Static Routing configuration.
RIP next generation (RIPng) is an extension of RIP-2 for IPv4. RIPng for
IPv6 is IPv6 RIPng. This document introduces the commands for RIPng
configuration.
OSPFv3 is OSPF version 3 for short, supporting IPv6 and compliant with
RFC2740 (OSPF for IPv6). This document introduces the commands for
OSPFv3 configuration.
IS-IS with IPv6 support is called IPv6 IS-IS dynamic routing protocol. This
document introduces the commands for IPv6 IS-IS configuration.
To support multiple network layer protocols, IETF extended BGP-4 by
introducing IPv6 BGP. This document introduces the commands for IPv6
BGP configuration.
Description