Display Dhcp Relay Security Statistics - 3Com S7906E Command Reference Manual

Description
Use the display dhcp relay security command to display information about bindings of DHCP relay
agents. If no parameter is specified, information about all bindings will be displayed.
Examples
# Display information about all bindings.
<Sysname> display dhcp relay security
IP Address
10.1.1.1
10.1.1.5
--- 2 dhcp-security item(s) found
Table 2-2 display dhcp relay security command output description
Field
IP Address
MAC Address
Type
Interface

display dhcp relay security statistics

Syntax
display dhcp relay security statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp relay security statistics command to display statistics information about
bindings of DHCP relay agents.
Examples
# Display statistics about bindings of DHCP relay agents.
<Sysname> display dhcp relay security statistics
Static Items
Dynamic Items
Temporary Items
All Items
MAC Address Type
00e0-0000-0001 Static
00e0-0000-0000 Static
Client IP address
Client MAC address
Type of binding, including dynamic, static, and temporary.
Layer 3 interface connecting to the DHCP client. If no interface is recorded in
the binding entry, "N/A" is displayed.
:1
:0
:0
:1
Interface
Eth1/1
Vlan2
---
Description
2-14