Preference; Ripng - 3Com S7906E Command Reference Manual

[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
# Restore the default.
[Sysname-ripng-100] undo maximum load-balancing

preference

Syntax
preference [ route-policy route-policy-name ] preference
undo preference [ route-policy ]
View
RIPng view
Default Level
2: System level
Parameters
route-policy-name: Name of a routing policy, in the range of 1 to 19 characters.
preference: RIPng route priority, in the range of 1 to 255.
Description
Use the preference command to specify the RIPng route priority.
Use the undo preference route-policy command to restore the default.
By default, the priority of a RIPng route is 100.
Using the route-policy keyword can set a priority for routes filtered in by the routing policy:
If a priority is set in the routing policy, the priority applies to matched routes, and the priority set by
the preference command applies to routes not matched.
If no priority is set in the routing policy, the one set by the preference command applies to all
routes.
Examples
# Set the RIPng route priority to 120.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] preference 120
# Restore the default RIPng route priority.
[Sysname-ripng-100] undo preference

ripng

Syntax
ripng [ process-id ]
undo ripng [ process-id ]
1-10