3Com S7906E Command Reference Manual page 1237

1
MBGP Configuration Commands
The term "router" in this document refers to a generic router or an Ethernet switch running routing
protocols.
For information about route policy commands, refer to Route Policy Commands in the IP Routing
Volume.
MBGP Configuration Commands
aggregate (MBGP family view)
Syntax
aggregate ip-address { mask | mask-length } [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy route-policy-name ] *
undo aggregate ip-address { mask | mask-length }
View
IPv4 MBGP address family view
Default Level
2: System level
Parameters
ip-address: Summary address.
mask: Summary mask, in dotted decimal notation.
mask-length: Summary mask length, in the range 0 to 32.
as-set: Creates a summary with AS set.
attribute-policy route-policy-name: Sets the attributes of the summary route according to the route
policy. The route policy name is a string of 1 to 19 characters.
detail-suppressed: Advertises the summary route only.
suppress-policy route-policy-name: Suppresses specific routes defined in the route policy. The route
policy name is a string of 1 to 19 characters.
origin-policy route-policy-name: References the route policy to determine routes for summarization.
The route policy name is a string of 1 to 19 characters.
The keywords of the command are described as follows:
1-1