3Com S7906E Command Reference Manual page 1003

Examples
# Display IPv6 IS-IS routing information.
<Sysname> display isis route ipv6
Destination: 2001:2::
Flag : D/L/-
Next Hop : Direct
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 1-1 display isis route ipv6 command output description
Field
Destination
PrefixLen
Flag/Flags
Cost
Next Hop
Interface
# Display detailed IPv6 IS-IS routing information.
<Sysname> display isis route ipv6 verbose
IPV6 Dest : 2001:1::/64
Admin Tag : -
NextHop :
FE80::200:FCFF:FE00:7507
IPV6 Dest : 2001:2::/64
Admin Tag : -
NextHop :
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv6 Level-1 Forwarding Table
-------------------------------------
IPv6 destination address prefix
Length of the prefix
Flag of routing information status
D: This is a direct route.
R: The route has been added into the routing table.
L: The route has been advertised in a LSP.
U: Route leaking flag, indicating the Level-1 route is from Level-2. U means the
route will not be returned to Level-2.
Value of cost
Next hop
Outbound interface
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv6 Level-1 Forwarding Table
-------------------------------------
PrefixLen: 64
Cost
Interface: Vlan200
Description
Cost : 20
Src Count : 2
Interface :
Vlan200
Cost : 10
Src Count : 2
Interface :
1-2
: 10
Flag : R/-/-
ExitIndex :
0x00000003
Flag : D/L/-
ExitIndex :