Import-Route - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
acl6-number: Specifies the number of an ACL to filter incoming routing information, in the range of 2000
to 3999.
ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list to filter incoming routes, in the
range 1 to 19 characters.
Description
Use the filter-policy import command to define an inbound route filtering policy. Only routes which
match the filtering policy can be received.
Use the undo filter-policy import command to disable inbound route filtering.
By default, RIPng does not filter incoming routing information.
Examples
# Reference IPv6 prefix list Filter1 to filter incoming RIPng updates.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] filter-policy ipv6-prefix Filter1 import

import-route

Syntax
import-route protocol [ process-id ] [ allow-ibgp ] [ cost cost | route-policy route-policy-name ] *
undo import-route protocol [ process-id ]
View
RIPng view
Default Level
2: System level
Parameters
protocol: Specifies a routing protocol from which to redistribute routes. Currently, it can be bgp4+,
direct, isisv6, ospfv3, ripng, or static.
process-id: Process ID, in the range of 1 to 65535. The default is 1.This argument is available only when
the protocol is isisv6, ospfv3, or ripng.
cost: Routing metric of redistributed routes, in the range of 0 to 16. If cost value is not specified, the
metric is the default metric specified by the default cost command.
route-policy route-policy-name: Specifies a routing policy by its name with 1 to 19 characters.
allow-ibgp: Optional keyword when the specified protocol is bgp4+. The import-route bgp4+
command redistributes only EBGP routes. The import-route bgp4+ allow-ibgp command
redistributes additionally IBGP routes, thus be cautious when using it.
1-8