Peer Default-Route-Advertise (Bgp/Bgp-Vpn Instance View); Peer Description (Bgp/Bgp-Vpn Instance View) - 3Com S7906E Command Reference Manual

[Sysname-bgp-vpn1] peer test connect-interface loopback 0

peer default-route-advertise (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } default-route-advertise [ route-policy route-policy-name ]
undo peer { group-name | ip-address } default-route-advertise
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
route-policy-name: Routing policy name, a string of 1 to 19 characters.
Description
Use the peer default-route-advertise command to advertise a default route to a peer/peer group.
Use the undo peer default-route-advertise command to disable default route advertisement to a
peer/peer group.
By default, no default route is advertised to a peer/peer group.
With this command used, the router unconditionally sends a default route with the next hop being itself
to the peer/peer group regardless of whether the default route is available in the routing table.
Examples
# In BGP view, advertise a default route to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test default-route-advertise
# In BGP-VPN instance view, advertise a default route to peer group test (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test default-route-advertise

peer description (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } description description-text
undo peer { group-name | ip-address } description
1-46