Area (Ospfv3 View); Bandwidth-Reference - 3Com S7906E Command Reference Manual

<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 1
[Sysname-ospfv3-1-area-0.0.0.1] abr-summary 2000:1:1:: 48

area (OSPFv3 view)

Syntax
area area-id
View
OSPFv3 view
Default Level
2: System level
Parameters
area-id: ID of an area, a decimal integer (in the range of 0 to 4294967295 and changed to IPv4 address
format by the system) or an IPv4 address.
Description
Use the area command to enter OSPFv3 area view.
The undo form of the command is not available. An area is removed automatically if there is no
configuration and no interface is up in the area.
Examples
# Enter OSPFv3 Area 0 view.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0]

bandwidth-reference

Syntax
bandwidth-reference value
undo bandwidth-reference
View
OSPFv3 view
1-2