Pim Ipv6 Hello-Option Neighbor-Tracking - 3Com S7906E Command Reference Manual

View
Interface view
Default Level
2: System level
Parameters
interval: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.
Description
Use the pim ipv6 hello-option lan-delay command to configure the LAN-delay time, namely the
device waits between receiving a prune message and taking a prune action, on the current interface.
Use the undo pim ipv6 hello-option lan-delay command to restore the system default.
By default, the LAN-delay time is 500 milliseconds.
Related commands: pim ipv6 hello-option override-interval, hello-option override-interval,
hello-option lan-delay.
Examples
# Set the LAN-delay time to 200 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option lan-delay 200

pim ipv6 hello-option neighbor-tracking

Syntax
pim ipv6 hello-option neighbor-tracking
undo pim ipv6 hello-option neighbor-tracking
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the pim ipv6 hello-option neighbor-tracking command to disable join suppression, namely
enable neighbor tracking, on the current interface.
Use the undo pim ipv6 hello-option neighbor-tracking command to enable join suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
Related commands: hello-option neighbor-tracking.
1-32