Filter-Policy Export (Is-Is View) - 3Com S7906E Command Reference Manual

Parameters
simple: Specifies the simple authentication mode.
md5: Specifies the MD5 authentication mode.
password: Specifies a password. For simple authentication mode, the password must be plain text. For
md5 authentication mode, the password can be either plain text or cipher text. A plain text password
can be a string of up to 16 characters, such as user918. A cipher password must be a string of 24
characters, such as _(TT8F]Y\5SQ=^Q`MAF4<1!!.
ip: Checks IP related fields in LSPs.
osi: Checks OSI related fields in LSPs.
Whether a password should use ip or osi is not affected by the actual network environment.
Description
Use the domain-authentication-mode command to specify the routing domain authentication mode
and a password.
Use the undo domain-authentication-mode command to restore the default.
No routing domain authentication is configured by default
The configured password in the specified mode is inserted into all outgoing Level-2 packets (LSP,
CSNP and PSNP) and is used for authenticating the incoming Level-2 packets.
Note that:
All the backbone routers must have the same authentication mode and password.
If neither ip nor osi is specified, the OSI related fields in LSPs are checked.
Related commands: area-authentication-mode, isis authentication-mode.
Examples
# Specify the routing domain authentication mode as simple and password as 123456.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] domain-authentication-mode simple 123456

filter-policy export (IS-IS view)

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name | route-policy route-policy-name } export
[ protocol [ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]
View
IS-IS view
1-27