3Com S7906E Command Reference Manual page 583

Default Level
1: Monitor level
Parameters
slot slot-number: Displays the ICMP statistics on a slot.
Description
Use the display icmp statistics command to display ICMP statistics.
Related commands: display ip interface (in IP Addressing Commands of the IP Services Volume),
reset ip statistics.
Examples
# Display ICMP statistics.
<Sysname> display icmp statistics
Input: bad formats
echo
source quench 0
echo reply
timestamp
mask requests 0
time exceeded 0
Output:echo
source quench 0
echo reply
timestamp
mask requests 0
time exceeded 0
Table 1-3 display icmp statistics command output description
Field
bad formats
bad checksum
echo
destination unreachable
source quench
redirects
echo reply
parameter problem
timestamp
information request
mask requests
mask replies
information reply
0 bad checksum
5 destination unreachable 0
redirects
10 parameter problem
0 information request
mask replies
10 destination unreachable 0
redirects
5 parameter problem
0 information reply
mask replies
Number of input wrong format packets
Number of input wrong checksum packets
Number of input/output echo packets
Number of input/output destination unreachable packets
Number of input/output source quench packets
Number of input/output redirection packets
Number of input/output replies
Number of input/output parameter problem packets
Number of input/output time stamp packets
Number of input information request packets
Number of input/output mask requests
Number of input/output mask replies
Number of output information reply packets
1-5
0
0
0
0
0
0
0
0
0
Description