Ipv6 Is-Is Configuration Commands - 3Com S7906E Command Reference Manual

1

IPv6 IS-IS Configuration Commands

IPv6 IS-IS Configuration Commands
The term "router" in this document refers to a router in a generic sense or a Layer 3 switch.
IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6 routing information
instead. This document describes only IPv6 IS-IS exclusive commands. Refer to IS-IS Commands
in the IP Routing Volume for other IS-IS configuration commands.
EA boards (such as LSQ1GP12EA and LSQ1TGX1EA) do not support IPv6 features.
display isis route ipv6
Syntax
display isis route ipv6 [ [ level-1 | level-2 ] | verbose ] * [ process-id ]
View
Any view
Default Level
1: Monitor level
Parameters
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: IS-IS process ID, in the range 1 to 65535.
level-1: Display Level-1 IPv6 IS-IS routes only.
level-2: Displays Level-2 IPv6 IS-IS routes only.
If no level is specified, both Level-1 and Level-2 (namely Level-1-2) routing information will be
displayed.
Description
Use the display isis route ipv6 command to display IPv6 IS-IS routing information.
1-1