Display Mld Interface - 3Com S7906E Command Reference Manual

Subvlan flags: R-Real VLAN, C-Copy VLAN
Router port(s)
( 00:01:30 )
IP group address
MAC group address
Attribute
Host port(s)

display mld interface

Syntax
display mld interface [ interface-type interface-number ] [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command will display the information of all interfaces running MLD.
verbose: Displays detailed MLD configuration and operation information.
Description
Use the display mld interface command to view MLD configuration and operation information on the
specified interface or all MLD-enabled interfaces.
Examples
# View the detailed MLD configuration and operation information on Vlan-interface 1.
<Sysname> display mld interface vlan-interface 1 verbose
Vlan-interface1(FE80::200:AFF:FE01:101):
MLD is enabled
Current MLD version is 2
Value of query interval for MLD(in seconds): 125
Field
Sub-VLAN flag: R stands for real egress
sub-VLAN under the current entry, and C for
sub-VLAN copied from a (*, G) entry to an (S, G)
entry.
Number of router ports
Remaining time of dynamic member port or
router port aging timer. On a distributed device,
to get this time value of a non-aggregation port
on a board other than the main processing unit,
you must specify the number of the slot where
the corresponding board resides by using slot
slot-number. This is not required for an
aggregation port.
Address of an IPv6 multicast group
Address of a MAC multicast group
Attribute of an IPv6 multicast group
Number of member ports
1-4
Description