C-Bsr (Ipv6 Pim View); C-Bsr Hash-Length (Ipv6 Pim View) - 3Com S7906E Command Reference Manual

[Sysname] pim ipv6
[Sysname-pim6] bsr-policy 2000

c-bsr (IPv6 PIM view)

Syntax
c-bsr ipv6-address [ hash-length [ priority ] ]
undo c-bsr
View
IPv6 PIM view
Default Level
2: System level
Parameters
ipv6-address: IPv6 address of the interface that is to act as a C-BSR.
hash-length: Hash mask length, in the range of 0 to 128. If you do not include this keyword in your
command, the corresponding global setting will be used.
priority: Priority of the C-BSR, in the range of 0 to 255. If you do not include this keyword in your
command, the corresponding global setting will be used. A larger value means a higher priority.
Description
Use the c-bsr command to configure the specified interface a C-BSR.
Use the undo c-bsr command to remove the related C-BSR configuration.
No C-BSR is configured by default.
Note that IPv6 PIM-SM must be enabled on the interface to be configured as a C-BSR.
Related commands: pim ipv6 sm, c-bsr hash-length, c-bsr priority, c-rp.
Examples
# Configure the interface with an IPv6 address of 1101::1 as a C-BSR.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr 1101::1

c-bsr hash-length (IPv6 PIM view)

Syntax
c-bsr hash-length hash-length
undo c-bsr hash-length
View
IPv6 PIM view
1-2